Quantum SPARK 1500 - Page 125

Configuring the Local Network
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|125
DNS Server Settings (For DHCPv4)
These settings are effective only if a DHCPv4 server is enabled.
Select one of these options:
n
Auto - This uses the DNS configuration of the appliance as configured in the Device >
DNS and Device > Internet pages.
n
Use the following IP addresses - Enter the IP addresses for the First DNS server,
Second DNS server, and Third DNS server.
Default Gateway
Select one of these options:
n
Use this gateway's IPaddress as the default gateway
n
Use the following IP address - Enter an IP address to use as the default gateway.
WINS
Select one of these options:
n
Use the WINS servers configured for the internet connection
n
Use the following WINS servers - Enter the IP addresses of the First and Second WINS
servers.
Lease section
Lease time - Configure the timeout in hours for a single device to retain a dynamically
acquired IP address.
Other Settings
You can optionally configure these additional parameters so they will be distributed to DHCP
clients:
n
Time servers
n
Call manager
n
TFTP server
n
TFTP boot file
n
X Window display manager
n
Avaya IP phone
n
Nortel IP phone
n
Thomson IP phone
Custom Options