Configuring VPN
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|309
Configuring the Remote Access Blade
In the VPN > Remote Access > Blade Control page you can establish secure encrypted
connections between devices such as mobile devices, home desktops and laptops, and the
organization through the Internet.
For Remote Access VPN, you must configure users on the appliance with credentials and
configure the required permissions for specified users. The appliance must be accessible from
the Internet.
We highly recommend that you first configure DDNS or an Internet connection with a static IP
address on the appliance. If you do not use a static IP address, your appliance's IP address
can change based on your Internet Service Provider. DDNS lets home users connect to the
organization by hostname and not IP address that can change. See Device > System > DDNS
&Device Access > DDNS for more details.
To configure DDNS, see
"Configuring DDNS and Access Service" on page162
.
To configure the static IP address, see
"Configuring Internet Connectivity" on page74
.
Note - Remote Access VPN supports connections from IPv4 addresses only.
To Next Page
Loading...
