Quantum SPARK 1500 - Prerequisites

Managing Internal Certificates
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|196
Prerequisites
n
In WebUI > Device > Local Network, delete bridge and switch configurations before you
start to configure a cluster.
n
The appliances in a cluster must have the same hardware, firmware (version and build),
and licenses.
Note - Connect the sync cables only after you complete the First Time
Configuration Wizard and remove the switch on both appliances. No additional
configuration is required on the members.
Best Practice - Designate the same LAN port for the Sync interface. The default Sync
interface is LAN2/SYNC.