Working with User Awareness
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|259
n
Domain
n
IPv4 address
n
IPv6 address
n
User name
n
Password
n
User DN - Click Discover for automatic discovery of the DN of the object that
represents that user or enter the user DN manually.
4. To select user groups from specific branches, select the checkbox Use user groups
from specific branch only.
Click Add and enter a branch path in the AD Branch field.
5. Click Apply
You can also add a new AD Domain in the Users & Objects > Authentication Servers
page.
Browser-Based Authentication
Blocking unauthenticated users
1. To block access for unauthenticated users when the portal is not available, select
Block unauthenticated users when the captive portal is not applicable.
This configuration option forces users using non-HTTP traffic to log in first through
Browser-Based Authentication.
2. Select if unidentified users are redirected to Captive Portal for All traffic or Specific
destinations.
In most cases, all traffic is not used because it is not a seamless identification method.
3. Under Specific destinations, select Internet or Selected network objects.
If you select Selected network objects, select the objects from the list or create new
objects.
4. Click Finish.
To edit settings and configure portal customization for Browser-Based Authentication
1. Under Policy Configuration, select Browser-Based Authentication and click
Configure.
2. In the Identification tab, you can edit settings configured in the wizard if necessary.
3. In the Customization tab, select the relevant options:
To Next Page
Loading...
