Working with the Firewall Access Policy
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|221
To change the rule order:
1. Select the rule to move.
2. Drag and drop it to the necessary position.
Note - You can only change the order of manually defined rules.
Updatable Objects
An updatable object is a network object which represents an external service, such as Office
365, AWS, Geo locations, and more. You can select from the list of updatable objects. The
categories depend on the online service update.
External services providers publish lists of IP addresses or Domains or both to allow access to
their services. These lists are dynamically updated. Updatable objects derive their contents
from these published lists of the providers, which Check Point uploads to the Check Point
cloud. The updatable objects are updated automatically on the Security Gateway each time
the provider changes a list. There is no need to install policy for the updates to take effect.
For a list of currently supported objects, see sk173416.
You can import updatable objects to use in the firewall policy rules.
To import an updatable object:
1. In the Firewall Access Policy page, in the Rule Base, click New. If necessary, specify
the rule order.
2. Click Updatable objects and select the objects you want.
3. Click Import.
4. Edit the rule so the source and destination use the specified countries.
5. Select the Action and Log.
6. Optional - Enter a comment.
7. Optional - Apply limitations such as time or traffic limits.
8. Click Apply.
To Next Page
Loading...
