Viewing Monitoring Data
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|58
Network
By default, network statistics are shown for the last hour. You can also see statistics for the last
day. Select the applicable option Last hour or Last day from the Network section's title bar.
The data is automatically refreshed for the time period:
Last hour - At one minute intervals. For example, if you generate a report at 10:15:45 AM, the
report represents data from 9:15 to 10:15 AM.
Last day - At hourly intervals. For example, if you generate a report at 10:15 AM, the report
represents data from the last 24 hours ending at 10:00 AM of the current day.
n
Bandwidth Usage - The doughnut chart shows the top 10 applications or users that
consumed the most bandwidth in the selected time frame (last hour or last day). Click the
Applications or Users links to toggle between the statistics. To show user information
the User Awareness blade must be activated.
n
Top Bandwidth Consuming - Shows statistics for the top bandwidth consuming
application, category, site, and user in percentages and the amount of traffic (MB or GB).
n
Traffic - By default, shows the total amount of traffic received and sent in an area graph.
The time axis reflects the time frame (last hour or last day) selected for the Network
section. For last hour, the graph shows 5 minute intervals and for last day, hourly
intervals. You can click the Received and Sent links to see only the amount of traffic
received or sent. The orange area on the graph represents sent traffic. The blue area
represents received traffic.
If you hover over a time interval, a popup box shows:
n
The date and time
n
The traffic sent or received
n
The total traffic for that time interval
n
Total traffic statistics - Next to the area graph you can see total traffic statistics for the last
day or hour.
Security
Infected devices - Shows the number of:
n
Infected devices
n
Infected servers
n
Recently active infected devices
To Next Page
Loading...
