Configuring VPN
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|308
To authenticate with an existing 3rd party certificate:
1. Create a P12 certificate for the local and peer gateway.
2. Upload the P12 certificate using the Upload P12 Certificate option on each gateway.
3. Make sure that the 3rd party CA is installed on both of the gateways.
Use the Add option in
"Managing Trusted CAs" on page357
.
Monitoring VPN
To make sure the VPN is working:
1. Pass traffic between the local and peer gateway.
2. Go to VPN > VPN Tunnels to monitor the tunnel status.
See
"Viewing VPN Tunnels" on page350
.
To Next Page
Loading...
