Inspecting VoIP Traffic
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|253
Configuring Smart Accel in R81.10.00
To enable Smart Accel
1. Go to the Access Policy view > Firewall section > Smart Accel page.
2. Click the On toggle.
3. To the right of the On/Off toggle, click the services link that appears in one of these
sentences:
n
All services selected
n
X/Y services selected
The Smart Accel Services window opens.
By default, all the services are selected.
4. If it is necessary to inspect a service, then clear its checkbox.
5. Click Apply
6. At the bottom of the page, click Apply.
To disable Smart Accel
1. Go to the Access Policy view > Firewall section > Smart Accel page.
2. Click the Off toggle.
3. At the bottom of the page, click Apply.
To Next Page
Loading...
