Managing System Services
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|393
Managing System Services
The Users & Objects > Services page lists the system services configured in the system. In
this page you can add new services, edit services, and delete services.
You use service objects to easily define the different network protocols. This is usually with IP
protocol and ports (used by the TCP and UDP IP protocols).
These objects can be used to define your security policy, as well as policy based routing rules.
Many service objects are predefined with the system and cannot be deleted. Those predefined
"system services" represent the appliance's ability to perform deep inspection on those
services for connectivity and security reasons. The system services sometimes have
additional configuration options.
To create a new service:
1. Click New.
2. In the Service tab, enter information in the fields that apply to the type of service you
select. Note that not all fields may show:
n
Name - Enter the service's name.
n
Type - Select the service type from the list:
l
TCP
l
UDP
l
ICMP - Select this option if it is necessary to represent a specific option within
the ICMP protocol. Note that this is an advanced option.
l
Other - Select this option to represent any IP protocol other than TCP or
UDP.
n
Ports - Enter the port(s) if you selected Type - TCP or UDP. Enter a specific port
number or port range.
n
IP Protocol - Enter the IP protocol, if in the Type field you selected Other.
n
ICMP type and ICMP code - Enter the ICMP type and code that you want the
service object to represent as listed in RFC 792. This option is only relevant, if in
the Type field you selected ICMP.
n
Comments - Enter an optional comment.
To Next Page
Loading...
