SD-WAN
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|242
Predefined Steering Behavior Objects
The appliance has several predefined Steering Behavior objects:
1. From the left tree, click Access Policy.
2. In the middle pane, expand the section Firewall and click SD-WAN.
3. Scroll down until you see the tabs Performance and Policy.
4. Click the Performance tab. This tab shows predefined steering objects and how they
perform.
5. Click a predefined object to see its complete settings.
n
Icons of the applications this object uses.
n
Internet SD-WAN links this object uses.
n
Icons that show the state of each SD-WAN link.
n
When you hover on each SD-WAN link, the tooltip shows its quality (jitter, latency,
packet loss).
You cannot change the settings of the predefined objects.
Configuring User-Defined Steering Behavior Objects
The appliance has several predefined Steering Behavior objects:
1. From the left tree, click Access Policy.
2. In the middle pane, expand the section Firewall and click SD-WAN.
3. Scroll down until you see the tabs Performance and Policy.
4. Click the Policy tab.
5. From the top toolbar, click Manage Behaviors.
6. From the top toolbar, click New.
7. In the Name field, enter a descriptive name.
8. Optional: In the Comment field, enter the applicable text.
9. In the Thresholds section, configure the required criteria for the steering behavior.
Available options
n
Select Predefined and from the list, select the applicable category (each
category has predefined thresholds).
To Next Page
Loading...
