Configuring Advanced Remote Access Options
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|335
DNS Servers for Remote Access users
You can define up to three DNS servers for Remote Access clients. By default, the Office
mode first DNS for clients is set to this gateway.
To use a different DNS Primary server:
1. Click Configure manually.
2. In Office mode first DNS for clients, enter the IP address of a server to use as the DNS
server.
3. Click Apply
DNS Domain Name
You can set a DNS domain name that the Remote Access clients' devices automatically use to
attempt to resolve non-FQDN domains. By default, the suffix is automatically configured to
take the DNS domain name configured in the DNS page.
To configure a manual DNS domain name:
1. Click Configure manually.
2. In DNS domain name, enter the DNS domain name suffix to use.
3. Click Apply
To configure the DNS domain name to be the same as the defined DNS domain name:
1. Click Configure automatically.
2. Click Apply
The DNS domain name shows the text "Same as DNS domain name".
To Next Page
Loading...
