Inspecting VoIP Traffic
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|251
Smart Accel
On the Smart Accel page, you can bypass the network inspection for specific objects:
n
Services - Includes Corporate Services, Media Streaming Services, Social Media
Services, and Web Conferencing applications.
n
Assets - Devices such as a computer, audio player, or alarm (from R81.10.05).
This improves connectivity and optimizes the load on the Quantum Spark Security Gateway.
Important - You cannot use Smart Accel and SSL Inspection at the same time.
Configuring Smart Accel in R81.10.05 and higher
Smart Accel for Services
To enable Smart Accel for Services
Note - Smart Accel for Services is enabled ("On") by
default.
1. Go to the Access Policy view > Firewall section > Smart Accel page.
2. In the section Smart Accel Services, click the Off toggle.
Wait for the toggle to change to On.
3. To the right of the On/Off toggle, click the services link that appears in one of these
sentences:
n
All services selected
n
X/Y services selected
The Smart Accel Services window opens.
By default, all the services are selected.
4. If it is necessary to inspect a service, then clear its checkbox.
If it is necessary to bypass the inspection for a service, then select its checkbox.
5. Click Apply
To disable Smart Accel for Services
1. Go to the Access Policy view > Firewall section > Smart Accel page.
2. In the section Smart Accel Services, click the On toggle.
To Next Page
Loading...
