Configuring the QoS Blade
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|263
Configuring the QoS Blade
In the Access Policy view > QoS section > Blade Control page you can activate QoS and
configure the QoS default policy.
The QoS (bandwidth control) policy is a set of rules that lets you set bandwidth parameters to
control the flow of communication to and from your network. These rules make sure that
important traffic is prioritized so your business can work with minimum disruption when there is
network congestion.
You can configure QoS on Internet connections. This requires at least one Internet connection
to be configured with the maximum download and/or upload speeds provided by your ISP. For
more information about your download and upload speeds, contact your local ISP.
QoS policy applies to traffic over external interfaces only.
QoS
Select one of the options to set the Access Policy control level:
n
On - Enforces the default QoS policy.
n
Off - QoS default policy is not enforced.
Note - When the blade is managed by Cloud Services, a lock icon is shown.
You cannot toggle between the on and off states. If you change other policy
settings, the change is temporary. Any changes made locally will be overridden
in the next synchronization between the gateway and Cloud Services.
To Next Page
Loading...
