Advanced Routing
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|176
In the Device > Advanced Routing tab > OSPF page, you can configure Open Shortest Path
First (OSPF) dynamic routing settings.
For WebUI and Gaia Clish configuration instructions, see the
Quantum Spark R81.10.X
Dynamic Routing CLI Guide for 1500, 1600, 1800, 1900, 2000 Appliances
.
Inbound Route Filters
Note - In the R81.10.X releases, this feature is available starting from the R81.10.05
version.
In the Device > Advanced Routing tab, you can configure Inbound Route Filters for dynamic
routing.
For WebUI and Gaia Clish configuration instructions, see the
Quantum Spark R81.10.X
Dynamic Routing CLI Guide for 1500, 1600, 1800, 1900, 2000 Appliances
.
Route Redistribution
Note - In the R81.10.X releases, this feature is available starting from the R81.10.05
version.
In the Device > Advanced Routing tab > Route Redistribution page, you can configure Route
Redistribution for dynamic routing.
For WebUI and Gaia Clish configuration instructions, see the
Quantum Spark R81.10.X
Dynamic Routing CLI Guide for 1500, 1600, 1800, 1900, 2000 Appliances
.
Routing Options
Note - In the R81.10.X releases, this feature is available starting from the R81.10.05
version.
In the Device > Advanced Routing tab > Routing Options page, you can configure Routing
Options (protocol ranks) for dynamic routing settings.
For WebUI and Gaia Clish configuration instructions, see the
Quantum Spark R81.10.X
Dynamic Routing CLI Guide for 1500, 1600, 1800, 1900, 2000 Appliances
.
Routing Monitor
Note - In the R81.10.X releases, this feature is available starting from the R81.10.05
version.
In the Device > Advanced Routing tab > Routing Table page, you can view the routing table
and configure manual routing rules.
For WebUI and Gaia Clish configuration instructions, see the
Quantum Spark R81.10.X
Dynamic Routing CLI Guide for 1500, 1600, 1800, 1900, 2000 Appliances
.
To Next Page
Loading...
