Quantum SPARK 1500 - Remote Access Configuration

Configuring VPN
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|304
Remote Access Configuration
These are the methods to configure remote access users:
n
Local users
n
RADIUS users
n
AD users
To allow only specified users to connect with a remote access client, set group permissions for
the applicable user type. Select the arrow next to the Add option and select the relevant group
option. See "Configuring Remote Access Users" on page322 .
To configure new local users:
1. Go to VPN > Remote Access Users.
2. Click Add to add local users.
3. Make sure that the Remote Access permissions checkbox is selected.
For more information, see "Configuring Remote Access Users" on page322 .
To configure existing users:
1. Go to VPN > Remote Access Users.
2. Click Edit to make sure that the Remote Access permissions checkbox is selected.
For more information, see "Configuring Remote Access Users" on page322 .
To configure RADIUS users:
1. Go to VPN > Authentication Servers.
2. Click Configure to add a RADIUS server. See "Configuring Remote Access
Authentication Servers" on page328 .
3. Click permissions for RADIUS users to set access permissions.
To configure AD users:
1. Go to VPN > Authentication Servers and click New to add an AD domain. See
"Configuring Remote Access Authentication Servers" on page328 .
2. Click permissions for Active Directory users to set access permissions.