Managing Internal Certificates
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|202
Viewing the Cluster Status
Procedure
1. Connect to the WebUI on a Cluster Member:
https://<IP Address of the Cluster Member>:4434
Best Practice - After the cluster is successfully configured, connect to
https://<Virtual IP Address of the Cluster>:4434. This
redirects you to the WebUI Home > System page for the active Cluster
Member.
2. From the left navigation panel, click Device.
3. In the Advanced section, click the High Availability page.
4. Click View diagnostics.
To Next Page
Loading...
