Quantum SPARK 1500 - Page 201

Managing Internal Certificates
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|201
Column Description
Status Cluster status of the interface:
Status Description
High
Availability
Two physical interfaces in 2
Cluster Members act as a single
interface toward the network,
using a single virtual IP address.
Note - In this cluster solution,
each interface has a local IP
address in addition to the
shared single virtual IP
address.
Sync Two physical interfaces must be
defined as Sync interfaces and
connected between the members
to allow proper failover as
needed. The default is to use
LAN2/Sync physical port.
Non HA This status is also called private.
The physical interface in this
member does not participate in
High Availability functions.
Monitored This status is also called private
monitored.
The physical interface on this
Cluster Member is not coupled
with another interface on the other
Cluster Member as in High
Availability interface mode.
The interface's status is still
monitored, and if a problem
occurs, the Cluster Member fails
over to the other Cluster Member.
IP Address Cluster Virtual IP address configured on the interface.
Member IP Address Physical IP address configured on the interface.