IoT
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|254
IoT
The Access Policy > Firewall > IoT page shows the automatic policy enforcement for each
IoT asset type. All connected devices are automatically displayed on the Home > Monitoring >
Assets page. The IoT page shows only the IoT devices.
When you enable the IoT blade on the appliance, it recognizes each IoT device that connects
to the Security Gateway and automatically enforces practices in the preconfigured IoT policy.
IoT is enabled by default.
You do not need to configure the policy for each IoT device that connects to your appliance.
General rules for IoT are preconfigured. For example, the appliance always allows traffic to
some domains, and always blocks traffic to other domains. You can make some changes to
the policy.
Getting Started
1. Go to Access Policy >Firewall >IoT.
2. Move the IoT Protection slider to Enable.
3.
Optional: Click Advanced policy settings and follow these steps
To Next Page
Loading...
