Quantum SPARK 1500 - Access Points; Viewing Monitoring Data; Viewing Reports; Dr. Spark

Access Points
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|427
Access Points
The Logs & Monitoring > Access Points page shows the available access points around your
gateway. The network information includes:
n
Channel
n
Frequency
n
Security
n
Signal strength
n
Signal noise
Use case:
Use this information to decide which network to connect to, and change based on your needs.
In addition, this page displays the current wireless radio frequency and channel in use and the
wireless networks configured.
Viewing Monitoring Data
See "Viewing Monitoring Data" on page57 .
Viewing Reports
See "Viewing Reports" on page60 .
Dr. Spark
With the Dr. Spark feature, you can check the Quantum Spark Appliance performance, sizing
and health status.
Note - The Dr. Spark feature is available as a separate tab starting from R81.10.08. In
earlier versions, the Dr. Spark buttons are available on the "Using System Tools" on
page430 page.