Configuring Advanced Remote Access Options
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|333
Configuring Advanced Remote Access Options
In the VPN > Remote Access Advanced page you can configure more advanced settings to
determine VPN remote access users' behavior.
You can also add bookmarks (HTML links or RDP links) for specified URLs or computers when
you connect through SSL VPN (see below). The next time you log in, your bookmarks are
shown.
Office Mode
Remote access VPN clients connect through a VPN tunnel from their homes to the appliance
and from there they can gain access into the organization's resources.
The appliance assigns each remote access user an IP address from a specified network so
that the traffic inside the organization is not aware that it originated from outside the
organization.
This technology is called Office Mode and the network used for supplying the IP addresses is
configurable.
To configure the Office Mode network:
1. Enter the Office Network address and Office Subnet Mask.
2. Click Apply
The default setting for office mode is 172.16.10.0/24.
To assign a VPN certificate:
1. In the Advanced page > Certificate authentication section, select one of these options:
n
Automatically use the last installed certificate.
n
Manually choose a VPN certificate - Select a certificate from the list of uploaded
certificates in the drop-down menu.
2. Click Apply.
To Next Page
Loading...
