Managing Network Object Groups
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|403
Managing Network Object Groups
The Users & Objects > Network Object Groups page lists the network object groups defined
in the system. In this page you can add new network object groups, edit network object groups,
delete network object group, and see where the network objects are in use.
We recommend you define groups for network objects to configure the security policy. If you
configure security policy with groups and not specified objects, it is much easier to maintain
the policy over time. When new network objects are added to the system, you only need to add
them to the relevant groups and your policy automatically applies.
To create a new network object group:
1. Click New.
The New Network Object Group window opens.
2. In Name, enter the applicable text.
3. Optional: In Comments, enter the applicable text.
4. Click Select to show the full list of available network objects and choose the relevant
checkboxes.
5. Click New if the existing list does not contain the network object you need.
For information on creating a new network object, see the Users & Objects > Network
Objects page.
6. Click Apply
The New Network Object Group window opens and shows the services you selected
7. You can also click New from the New Network Object Group window.
8. To remove a network object from the group list, select it and click Remove.
9. Click Apply
The network object group is added to the list of groups.
To edit a network object group:
1. Select a group from the list.
2. Click Edit.
3. Make the necessary changes.
4. Click Apply
To Next Page
Loading...
