Quantum SPARK 1500 - Page 402

Managing Network Objects
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|402
To edit a network object:
1. Select a network object from the list.
2. Click Edit.
3. Make the necessary changes.
4. Click Apply
To delete a network object:
1. Select the network object from the list.
2. Click Delete.
3. Click Yes in the confirmation message.
To filter for a specified network object:
1. In the Type to filter box, enter the name of the network object or part of it.
2. As you enter text, the list is filtered and shows matching results.
To add a new network object and bypass SSL inspection based on the host MAC address
(locally managed only):
1. Click New.
The New Network Object window opens.
2. In Type, select Device.
3. In Host MAC address, enter a custom value or select from the menu.
4. Select Bypass host with this MAC by SSL inspection.
5. In Object name, enter the applicable text.
6. Click Apply
Note - You can also do this on the Home >Active Devices page. Click Save as and
select Device type Network Object.