Quantum SPARK 1500 - Page 401

Managing Network Objects
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|401
To create a network object of type Network:
1. Click New.
The New Network Object window opens.
2. In Type, select Network.
3. In Network address, enter the IP address.
4. In Subnet mask, enter the subnet mask.
5. In Object name, enter the applicable text.
6. Click Apply
To create a network object of type Domain Name:
1. Click New.
The New Network Object window opens.
2. In Type, select Domain Name.
3. Enter the Domain (an FQDN).
4. Enter the Object name.
5. Click Apply
To create a network object of type Device:
1. Click New or Add.
The New Network Object window opens.
2. In Type, select Device.
3. In Host MAC address, enter the MAC address.
4. Optional: Select Bypass host with this MAC by SSL Inspection.
5. In Object name, enter the applicable text.
If you select to Use custom hardware name, configure:
n
Device type - Select from the pull-down menu.
n
Hardware
n
Operating system
6. Click Apply