Quantum SPARK 1500 - Advanced Routing; Bgp; Pim; Ospf

Advanced Routing
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|175
Advanced Routing
Note - In the R81.10.X releases, this feature is available starting from the R81.10.05
version.
In the Device > Advanced Routing tab, you can configure these dynamic routing settings:
n
BGP - Border Gateway Patrol (BGP). Can be deployed within and between autonomous
systems (AS).
n
OSPF - Open Shortest Path First (OSPF) is an Interior Gateway Protocol (IGP) used to
exchange routing information between routers within a single AS.
n
Inbound Route Filters - Control which external routes a routing protocol accepts.
n
Route Redistribution - Redistribute routes from one routing protocol into another
protocol. Similar to route maps for an export policy.
n
Routing Options - Configure protocol ranks.
n
Routing Monitor - View the routing table and configure manual routing rules.
For WebUI and Gaia Clish configuration instructions, see the Quantum Spark R81.10.X
Dynamic Routing CLI Guide for 1500, 1600, 1800, 1900, 2000 Appliances .
BGP
Note - In the R81.10.X releases, this feature is available starting from the R81.10.05
version.
In the Device > Advanced Routing tab > BGP page, you can configure Border Gateway Patrol
(BGP) dynamic routing settings.
For WebUI and Gaia Clish configuration instructions, see the Quantum Spark R81.10.X
Dynamic Routing CLI Guide for 1500, 1600, 1800, 1900, 2000 Appliances .
PIM
Note - In the R81.10.X releases, this feature is available starting from the R81.10.10
version.
In the Device > Advanced Routing tab > PIM page, you can configure Protocol-Independent
Multicast (PIM) dynamic routing settings.
For WebUI and Gaia Clish configuration instructions, see the Quantum Spark R81.10.X
Dynamic Routing CLI Guide for 1500, 1600, 1800, 1900, 2000 Appliances .
OSPF
Note - In the R81.10.X releases, this feature is available starting from the R81.10.05
version.