Deploying from a USB Drive or SD Card
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|28
Preparing the Configuration Files
The Quantum Spark Appliance Massive Deployment configuration files are composed of Gaia
Clish commands.
These are the file names that you can use:
n
autoconf.clish
n
autoconf.<MAC Address>.clish
<MAC Address>
is the specified MAC address in this format:
XX-XX-XX-XX-XX
You can create multiple configuration files for Quantum Spark Appliance gateways. The
gateways run both files or only one of them. First the autoconf.clish configuration file is
loaded. If there is a configuration file with the same MAC address as the gateway, that file is
loaded second.
Use the # symbol to add comments to the configuration file.
To Next Page
Loading...
