Managing the Device
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|93
To add a Bond as an additional internet connection:
1. In the Internet Connection page, click Add an internet connection...
The New Internet Connection window opens in the Configuration tab.
2. Configure the rest of the fields as for a new connection.
Cellular Connections
Configuring a Cellular Internet Connection
Note - The gateway can connect through IPv4, IPv6 or a mixed IPv4v6 service.
1. Click Configure Internet (if not configured at all), Add (for another Internet
connection), or Edit.
The New or Edit Internet Connection window opens.
2. In the Configuration tab, select Cellular for Interface name.
3. Click Apply
Note - This closes the Edit Internet Connection window.
The remaining steps are optional additional settings and are not essential for
configuration.
4. In the Cellular tab, under Cellular settings, select the Primary SIM and which SIM to
disable: SIM 1, SIM 2 or Neither.
n
SIM 1 – Micro-SIM
n
SIM 2 – Nano-SIM
5. For each SIM, enter the APN and PIN number.
Note - Some cellular carriers require a password to access the cellular
Internet. In this case, the administrator must enter the credentials to connect
to the appliance.
6. For Connection Type, select one of these values:
n
IPv4 – Both SIMs are configured to IPv4 only
n
IPv6 – Both SIMs are configured to IPv6 only
To Next Page
Loading...
