Configuring External Log Servers
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|413
Secured Syslog
Use Case
A system administrator wants to send system and/or security logs from the organization's
gateways in a secured and encrypted fashion. Therefore, he selects TLS Over TCP as the
protocol. UDP is not secure.
Notes:
n
Only one remote TLS server is supported.
n
You can upload a CA certificate to establish trust with the remote syslog server.
n
The TLS server must be configured using its domain name. Only UDP allows
you to configure the server by IP address.
n
The configured domain name must be identical to the domain name in the
server's certificate.
n
Both system and security logs are supported.
To configure additional syslog servers:
Click Add a syslog server....
To edit the syslog server:
1. Click the Edit link next to the server's IP address.
2. Edit the necessary information.
3. Click Apply
Note - When more than one server is defined, the syslog servers appear in a table.
Select the syslog server you want to edit and click Edit.
To delete the syslog server:
1. Select the syslog server.
2. Click Delete.
Notifications
See
"Notifications" on page49
.
To Next Page
Loading...
