Quantum SPARK 1500 - Page 139

Backup, Restore, Upgrade, and Other System Operations
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|139
To revert to the factory default image:
1. Click Factory Defaults.
2. Click OK in the confirmation message.
The factory default settings are restored. The appliance reboots to complete the
operation.
Note - This restores the default software image which the appliance came with
and also the default settings (IP address https://192.168.1.1:4434, the
username is admin, and the password is admin).
To make sure you have the latest firmware version:
Click Check now.
To automatically upgrade your appliance firmware when Cloud Services is not configured:
1. Click Configure automatic upgrades.
The Automatic Firmware Upgrades window opens.
2. Click Perform firmware upgrades automatically.
3. Select the upgrade option to use when new firmware is detected:
n
Upgrade immediately
Or
n
Upgrade according to this frequency.
4. If you selected Upgrade according to this frequency, select one of the Occurs options:
n
Daily - Select the Time of day.
n
Weekly - Select the Day of week and Time of day.
n
Monthly - Select the Day of month and Time of day.
5. Click Apply
Notes:
n
When a new firmware upgrade is available, a note shows the version number.
Click Upgrade Now to upgrade it immediately, or click More Information to see
what is new in the firmware version.
n
If the gateway is configured by Cloud Services, automatic firmware upgrades
are locked. They can only be set by Cloud Services.