Quantum SPARK 1500 - Page 182

Configuring the Routing Table
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|182
Notes:
n
In the R81.10.X releases, this field is available starting from the
R81.10.10 version.
n
Rank is allowed only if in the Destination column, you selected
Specified IP Address.
n
Rank is per destination.
All routes with the same destination have the same rank, even though
their next hop and metric are different.
n
The default rank is 60.
n
To change the default route rank, go to Device view > "Advanced
Settings" on page207 .
11. Optional: Configure the nexthop probing.
In R81.10.08 and lower versions:
You must disable the probing because in these versions, the probing feature supports
only default static routes.
n
In R81.10.08 and R81.10.07 versions:
In the Monitoring field, select Off.
n
In R81.10.05 and lower versions:
In the Probing method field, select Off.
In R81.10.10 and higher versions:
In the Monitoring field, select the applicable option:
n
Off - To disable the route probing (this is the default).
n
On - To enable the route probing.
Configure the applicable probing servers. For example:
n
dns.google.com
n
dns.cloudflare.com
n
dns.opendns.com