Configuring the Routing Table
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|184
Procedure
1. From the left navigation panel, click Device.
2. In the Advanced Routing section, click the Routing Table page.
3. Above the routing table, click New.
The New Static Routing Rule window opens.
4. In the Destination column:
Leave the default value Any.
5. In the Source column:
Leave the default value Any.
6. In the Service column:
Leave the default value Any.
7. In the Next Hop column:
To Next Page
Loading...
