Managing Internal Certificates
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|199
e. On the page Step 1: Gateway Priority:
i. Select Configure as secondary member.
ii. Click Next.
f. On the page Step 2: SIC Settings:
i. Open the section Advanced.
ii. Configure the required settings for the Sync interface.
Important - The configuration on the secondary Cluster Member
must match the configuration on the primary Cluster Member.
iii. In the section Secure Internal Communication, in the field Password,
enter the same password you configured in the New Cluster Wizard on
the primary Cluster Member.
iv. In the section Secure Internal Communication, click Establish Trust.
v. Click Finish.
g. The secondary Cluster Member fetches the settings from the primary Cluster
Member and applies them.
To Next Page
Loading...
