SSL Inspection Policy
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|271
To install the certificate:
1. Manually copy the certificate file to your PC.
2. In the Windows PC, click the file and follow the wizard instructions to add the certificate
to the Trusted Root Certification Authorities repository.
Note - This is not the default repository in the Certificate Import Wizard.
Certificate installation varies according to the OS. To learn how to install the certificate in
your machine, see your OS vendor instructions.
SSL inspection uses the existing internal CA by default. To use your own certificate, you must
replace the internal CA.
To replace the internal CA:
1. Go to Certificates > Internal Certificate.
2. Click Replace Internal CA.
The Upload a P12 Certificate window opens.
3. Click Browse to select the certificate file.
4. Enter the Certificate name and Password.
5. Normally, the device suggests its own host name (when DDNS is configured) or its
external IP address. If you have multiple Internet connections configured, in load sharing
mode, you can manually enter an accessible IP address for this appliance. This is used
by remote sites to access the internal CA and check for certificate revocation.
6. Click Apply
To Next Page
Loading...
