Quantum SPARK 1500 - Page 279

Managing Threat Prevention
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|279
3. Under Protection Activation, for each confidence level (High confidence, Medium
confidence, and Low confidence), select the applicable action from the list:
n
Ask - Traffic is blocked until the user confirms it is allowed.
n
Prevent - Blocks identified virus or bot traffic, or identified malicious files, from
passing through the gateway.
n
Detect - Allows identified virus or bot traffic, or identified malicious files, to pass
through the gateway. This traffic is detected and logged.
n
Inactive - The protection is deactivated.
4. For Severity, select the level:
n
Low or above
n
Medium or above
n
High or above
n
Critical
5. For Performance impact, select the allowed impact level:
n
Low
n
Medium or lower
n
High or lower
6. To load the policy default values, click Load default settings:
n
Recommended
n
Strict
7. To save all settings on the Threat Prevention Blade Control page, click Apply.