Quantum SPARK 1500 - Page 321

Configuring VPN
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|321
a. Go to Access Policy > Firewall > Policy.
b. In the section Incoming, Internal and VPN traffic, click New.
c. Configure this rule:
Source Destination Service Action Log
OMPOOL OMPOOL
*Any Accept
Log, or None
d. Click Apply.
6. Configure the NAT Policy rule to disable NAT on the traffic between computers in the
Office Mode network:
a. Go to Access Policy > Firewall > NAT.
b. In the section NAT Rules, click View NAT rules.
c. Click New.
d. Configure this rule:
Original
Source
Original
Destinatio
n
Original
Service
Translated
Source
Translated
Destinatio
n
Translated
Service
OMPOO
L
OMPOOL
*Any *Origina
l
*Origina
l
*Origina
l
e. Click Apply.