Configuring the Site to Site VPN Blade
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|338
To configure the default access policy from remote VPN sites:
1. Select or clear the Allow traffic from remote sites (by default) checkbox. It is not
recommended to clear this checkbox, as the remote site is usually part of your
organization.
2. Select or clear the Log remote sites traffic (by default) checkbox.
3. Click Apply
Local Encryption Domain
The local encryption domain defines the internal networks accessible by encrypted traffic from
remote sites and networks, that traffic from them to remote sites is encrypted. By default, the
local encryption domain is determined automatically by the appliance. Networks behind LAN
interfaces and trusted wireless networks are part of the local encryption domain. Optionally,
you can manually create a local encryption domain instead. See the VPN > Site to Site
Advanced page for instructions.
To Next Page
Loading...
