Managing Installed Certificates
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|361
To create a new certificate to be signed by a CA:
1. Click New Signing Request.
2. Enter a Certificate name.
3. In the Subject DN enter a distinguished name (e.g. CN=myGateway).
4. Optional: - Click New to add alternate names for the certificate.
Select the Type, enter the Alternate name and click Apply.
5. Click Generate.
The new signing request is added to the table and the status shows "Waiting for signed
certificate".
Note - You cannot edit the request after it is created.
If the new signing request is signed by the Internal CA and the Organization Name is not
defined in the DN, the Internal CA automatically generates the Organization Name.
To export the signing request:
Click Export.
To upload the signed certificate when you receive the signed certificate from the CA:
1. Select the signing request entry from the table.
2. Click Upload Signed Certificate.
3. Browse to the signed certificate file (*.crt).
4. Click Complete.
The status of the installed certificate record changes from "Waiting for signed certificate" to
"Verified".
To upload a P12 file:
1. Click Upload P12 Certificate.
2. Browse to the file.
3. Edit the Certificate name if necessary.
4. Enter the certificate password.
5. Click Apply
To Next Page
Loading...
