Quantum SPARK 1500 - Page 38

The Home Tab
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|38
n
Probe DNS servers
n
Ping addresses
4. If you selected Ping addresses, enter the IP address(es).
5. Select the settings for:
n
Recovery time (seconds)
n
Max latency allowed (milliseconds)
n
Probing frequency for active connections (seconds)
6. Click Apply
When you log in to your appliance for the first time after completing the First Time
Configuration Wizard, the Sending Data to Check Point pop up window appears, with these
checkboxes:
n
Help us improve product experience by sending data to Check Point - The data sent
includes session durations, how long the system is running, logs, etc.
Note - Check Point does not upload data that contains private or sensitive
information.
n
Help us improve product stability by getting critical updates from Check Point -
Pushes critical updates outside of the regular update notification and upload schedule.
Available starting from R81.10.08.
Selecting these checkboxes is optional, but highly recommended.