Quantum SPARK 1500 - Page 383

Managing Authentication Servers
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|383
To edit a RADIUS server
1. Click the Users & Objects view > Users Management section > Authentication
Servers page.
2. Click the IP address link of the RADIUS server you want to edit.
3. Make the necessary changes.
4. Click Apply
To delete a RADIUS server
1. Click the Users & Objects view > Users Management section > Authentication
Servers page.
2. Next to the RADIUS server you want to delete, click the Remove link.
To configure a RADIUS server administrator
1. Click the Users & Objects view > Users Management section > Administrators page.
2. In the line Administrator RADIUS authentication is, click Edit permissions.
3. Select Enable RADIUS authentication for administrators.
4. Select one of these:
n
Use roles defined on RADIUS server
n
Use default role for RADIUS users
a. In the Default Administrators Role, select the applicable role.
b. Optional: Select For Administrators use specific RADIUS group only.
Enter the applicable RADIUS groups.
5. Click Apply