Quantum SPARK 1500 - Page 388

Managing Authentication Servers
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|388
To edit an Active Directory domain
1. Click the Users & Objects view > Users Management section > Authentication
Servers page.
2. In the section Active Directory section, select the Active Directory domain.
3. Click Edit.
4. Make the applicable changes.
You cannot change the Domain.
5. Click Apply
To delete an Active Directory domain
1. Click the Users & Objects view > Users Management section > Authentication
Servers page.
2. In the section Active Directory section, select the Active Directory domain.
3. Click Delete.
4. Click OK in the confirmation message.
To change synchronization mode with the defined Active Directories
1. Click the Users & Objects view > Users Management section > Authentication
Servers page.
2. In the section Active Directory section, click Configure.
3. Select the applicable option:
n
Automatic synchronization
n
Manual synchronization
Note - With this option, you can synchronize the user database known
to the appliance in all locations that this user database can be viewed.
For example:
l
The Users & Objects view > User Management section > Users
page.
l
The Access Policy > view > Firewall section > Policy page >
Source picker.
You cannot select a user from the Active Directory, only an Active
Directory user group.
You can select a local user.
4. Click Apply