Quantum SPARK 1500 - Page 443

SNMP
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|443
To enable an SNMP trap:
1. In the list of SNMP traps, double-click the name of the trap.
The SNMP Trap Configuration window opens.
2. Click Enabled.
The trap details, including the monitored object, Trap OID and description, show.
3. Click Apply
To edit an SNMP trap:
1. Select the trap from the list and click Edit.
2. Select the Enable trap option to enable the trap or clear it to disable the trap.
3. If the trap contains a value, you can edit the threshold value when necessary.
4. Click Apply