Using System Tools
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|68
Action
Available
From
Description
1. Click the Firewall Monitor Tool button.
2. Optional: Configure the applicable filters:
a. In the Monitor outgoing packets field, enter
how many outgoing packets to capture
before the tool must stop the traffic capture.
b. In the Monitor incoming packets field, enter
how many incoming packets to capture
before the tool must stop the traffic capture.
c. Select "-p all" to see the information for each
inspection chain module.
Warning - The CPU load increases
significantly.
d. Select "grep" to enter a free text filter.
n
This field is case-sensitive.
n
If the text must contains spaces, then
you must enclose it in single quotes or
double quotes.
n
The tool captures the specified number
of packets, and then filters the output to
show only the relevant lines.
3. To save the captured traffic into a plain-text file:
Note - If you selected "grep", then the saved file
contains only the relevant lines you see on the
screen.
a. Click Save to download the file.
b. Your web browser saves this file (fw_
monitor.log) in the default download
folder.
To Next Page
Loading...
