Quantum SPARK 1500 - Page 91

Managing the Device
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|91
n
Transix - If you select this option, these fields appear:
l
Update server URL - The Server URL if your IPv6 changed. Default value:
http://update.transix.jp/request
l
User Name - Your username for the updater service.
l
Password - Your username password for the updater service.
n
v6 Connect - If you select this option, these fields appear:
l
Update server URL - The Server URL if your IPv6 changed. Default value:
https://v6update.asahi-net.or.jp/prefix
l
User Name - Your username for the updater service.
l
Password - Your username password for the updater service.
n
Xpass - Includes additional services such as DDNS and the ability to buy a
prefix of IPv4. With Xpass, you can support 1/8/16 Static IPv4 address. If you
select this option, these fields appear:
l
Update server URL - The Server URL if your IPv6 changed.
l
User name - Your username for the updater service.
l
Password - Your username password for the updater service.
l
FQDN - The URL in this contract (Example: 1234abcd.v4v6.xpass.jp this
URL maps to the gateway).
l
DDNS ID - The ID for the DDNS service.
l
DDNS Pass - The password for the DDNS service.
l
Unnumbered - Select this checkbox if you want your IP1, IP8 or IP16 IPv4
address to be unnumbered for the option to assign the public IP from the
WAN network on LAN.
8. In the Advanced tab:
a. In the IPv4 over IPv6 (IPIP) Settings section, select Enable static IPv6 suffix.
Note - This is configured in the IPv6 connection configuration window.
Otherwise, IPIP is configured on the IPv4 connection.
b. Configure the default MTU of the IPIP interface to 1460 (IPv4 default = 1500).
The size of the IPv6 header is 40.
9. Click Apply.