Rain Bird MDC2 - Alarm Action Type; Alarm Action ID

Appendix IV, continued
102
Activate (Activ): Turns on a decoder, pump or schedule, depending on the specified alarm action type
and ID. The schedule will start on next full minute if possible or else it will be stacked.
Deactivate (Deact): Turns off a decoder, pump or schedule, depending on the specified Alarm Action Type
and Alarm ID. Deactivation can apply to all decoders, pumps and schedules. The
schedule shall stop immediately and its active decoders will be deactivated.
Object ID
Defines the ID of what to activate/deactivate depending on the alarm action and alarm action type.