Programming and Operation, continued
19
Getting Started
Remove the lower panel. Turn on the controller
and replace the panel.
The display briefly shows the software version and
controller type (MDC2).
A Power Returned message displays along with
the current date and time (24 hour military time).
Please see Appendix I: Conversion Chart from
Standard to Military Time on page 91.
The message prompts you to Press OK (the button
pointing to the OK label). This message also appears
when power returns after a power failure.
Note: You need to press the button pointing to
the OK label twice, to reach the Main Operating
Screen.
To Next Page
Loading...
