Introduction
1
Welcome to Rain Bird
®
Thank you for purchasing your new, state-of-the-art Rain Bird
®
Controller. For more than six decades, Rain Bird
®
has led the irrigation industry in meeting all of your water management needs by providing the highest quality
products and services available. Your new Rain Bird
®
Controller is designed to give you a lifetime of on-site
watering control.
The MDC Controllers
The MDC line of controllers are systems that completely manage your landscape and turf needs by letting you
control all your irrigation functions from one central location. MDC Controllers use Schedules to control the
days, times and length of time each valve operates.
Once you program and store irrigation Schedules and other instructions, the MDC communicates this
information, through a two-wire (MAXI cable) communication path, to numerous decoders located throughout
the irrigation system. The decoders act on command from the controller, activating solenoids on various valves,
master valves and pumps.
The MDC2 Controller uses a program module, which supports up to 50 (decoder) outputs. The controller also has
slots to hold three expansion modules. Each expansion module supports an additional 50 outputs. This means
you can configure your MDC2 Controller to support 50, 100, 150 and 200 outputs.
To Next Page
Loading...
Need help?
General
