Introduction, continued
2
Special Features
The MDC2 Controller mounts to a wall and has the following special features:
4 Anti-rust, corrosion-resistant design
4 Weather-resistant cabinet allowing you to mount the controller inside or outside
4 Stores up to 10 separate irrigation Programs and 1 auxiliary (non-irrigation) Program (which does not start
pumps)
4 Each Program supports up to 100 Steps (individual commands that complete a Program)
4 Each Program can start up to 6 times a day
4 Each Program runs on a 14-day Schedule
4 Input terminal connections for rain or alarm sensor
4 Output terminals for 3 communications cables
4 Communications cables to support flow and auxiliary sensors
4 Slots provided for 3 expansion modules supporting up to 200 single-output decoders (MDC2)
4 Easy-to-use menu tree system
4 Diagnostics to test decoders, schedules and short findings
4 The option to choose between 5 languages (U.S. English, British English, Spanish, French and German)
4 Backlighting that makes the liquid crystal display (LCD) easy to read
4 A serial communication port and modem allowing you to program the controller from a PC
4 Software to allow for remote programming and monitoring from a PC