Rain Bird MDC2 - What you will need

Installation, continued
7
What you will need
Before you begin installation, you may need the following tools and materials:
4 Slotted Head Screwdriver
4 Phillips Head Screwdriver
4 Thin Blade Screwdriver
4 Lineman’s Pliers
4 DBY Connectors
4 Hammer
4 Grounding Strap
4 Two-wire MAXI Cable (#14 AWG wire)
4 Two-wire MAXI Cable (#18 AWG wire)
4 #8 AWG or #10 AWG Bare Ground Wire
4 Tape Measure
4 Wire Stripper
4 Wire Nuts
4 Marking Pencil
4 Electric Drill (or Hammer Drill if installing in masonry or concrete wall)