Creating Irrigation Schedules
41
Once you customize the MCD2 Controller to the specific equipment and options in your system, the next step
is to create irrigation Schedules to best suit your turf needs. A Schedule is a series of events you wish to have
happen in the field at specific times. It is a watering plan that includes the days to water, times to begin and end
watering, the various decoders you wish to operate and how long you want them to operate.
You can set up 10 standard irrigation Programs, which will start pumps, and one auxiliary Program (Program
11), which does not start pumps. Programs 1-9 only run one at a time. You cannot run them together. However,
you can run Programs 10 and 11 simultaneously with any one of the other 9 Programs.
To Next Page
Loading...
