Rain Bird MDC2 - Printing Set-Up and Irrigation Data; Firmware Upgrade; Exiting the Remote Access Window

Operating the Controller, continued
75
Printing Set-Up and Irrigation Data
1. From the Rain Bird Remote Access window,
select File.
2. Select Print from the pull-down menu.
3. Select either Print set-up data or Print
irrigation schedules.
4. Select OK at the Print pop-up window for your
PC.
Exiting the Remote Access Window
1. From the Rain Bird Remote Access window,
select File.
2. Select Exit from the pull-down menu or select X
in the top corner of the window.