Raytheon V8010 User Manual

When -1 is pressed, the Longitude entry is complete and the display
changes back to the STORE WAYPOINT directory.
If you want to enter another waypoint, press 1 ENTER NEW WAypOINT? I.
This key returns you to the WAYPOINT NAME page and advances the
waypoint memory number to next available memory.
To designate a particular memory number to continue waypoint entries,
press ENTERW~NO._ .I
If you want to recheck the new waypoint entry, press the ~WAYPOINT LISTI
key.
if you are finished. This will return
e previous display mode.
2. Store WPT by TDs
-ml _____ _
262 38.4
TD2
!!!J!I!JI!J
If you wish to enter the waypoint coordinates in
t-EmmnmlDl AND EIq
Loran-C Time Differences,press them softkey
onthe STOREWAYPOINT menu.
CURSOR
Enter the waypoint TD 1 coordinate by typing in
the numeric value using all sixdigits. Press=1
when the TDl value is OK.
Example: Press 2,7,1,0,1,5,-.
TDl = 27101.5~s
The b (Right) direction key moves the blinking character cursor to the
next position to the right. The 4 (Left) direction key moves the blinking
character cursor to the next position to the left.
Enter the waypoint TD2 coordinate by typing the numeric value in using
sixdigits. Press-( when the TD2 value is OK.
Example: Press 4,4,2,1,0,2, ml. TD2 = 44210.2~s
If you are editing or correcting an existing waypoint by TDs and the TD I
is already correct, just press[m] to advance directly to the TD2 entry.
OPERATION 86

Raytheon V8010 Specifications

General

Brand	Raytheon
Model	V8010
Category	Marine Equipment
Language	English